Sigrist Exit Seals
The Sigrist Exit Seals are designed to fit any pipe size between !/4 inch OD to 1 5/8 inch OD
Model 2150
1 1/2 out side diameter too 1 5/8 out side diameter or .500 too 1.625
1 1/2 out side diameter too 1 5/8 out side diameter or .500 too 1.625
Model 2137
1 3/8 out side diameter too 1 1/2 or 1.375 too 1.500
1 3/8 out side diameter too 1 1/2 or 1.375 too 1.500
| Sigrist Exit Seal Selection.pdf |
The Sigrist Exit Seal Selection PDF is for field use. This three page PDF has a Exit Seal Chart showing all the Seals available between 1/4 inch and 1 5/8 inch. A Seal Selection Chart showing pipe sizes and selected seals. Tips for the field on installing Exit Seals.
| exit_seal_chart.xls |
The Exit Seal Chart shows all the available Exit Seals in .XLS. This Chart is for Print Building.
| exit_seal_selection.xls |
The Exit Seal Selection Chart shows all the Pipe Sizes and matching Seals. This .XLS is for Print Building.
Seals for Bulldog Housings
Model XXXX
4 inch start to 2 1/2
4 inch start to 2 1/2
4 inhch Bulldog start collar
The 4inch Bulldog start collar can be cut into the Pipe Chase Housing to add a pipe between 11/2 inches too 4 inches max OD. This provides a bolted gasketed start point for the Seals above.
