Bulldog Pipe Chase Housing
The Bulldog Pipe Chase Housing is designed for Pipes larger then 1 1/2 inches or have insulation on them that can not be interupted like low temp refrigeration, steam, solar and dry coolers.
Features Model AL 1010-2-4:
1. Two 4 inch start collars for seals.
2. Sigrist Exit Seals can be added for conduits.
3. Water Bib. Bibs must be on a BFP and winter draindown.
4. Welded Aluminum construction with all stainless hardware.
5. Powder Coated.
6. Housings and Curbs are available in Stainless Steel. Non stock.
7. We can build to your wind load requirements. Non stock.
8. We provide a hole for the Electrician to mount a GFCI.
9. Lid gasket is protected from the elements.
10. Built in skirt to protect the leading edge of the roof.
11. All mounting and lid hardware is designed so it dose not penetrate the Housing for additional protection.
12. Compress the leading edge of the roof between the housing and the top of the curb with a gasketed bolted connection.
Features Model AL 1010-2-4:
1. Two 4 inch start collars for seals.
2. Sigrist Exit Seals can be added for conduits.
3. Water Bib. Bibs must be on a BFP and winter draindown.
4. Welded Aluminum construction with all stainless hardware.
5. Powder Coated.
6. Housings and Curbs are available in Stainless Steel. Non stock.
7. We can build to your wind load requirements. Non stock.
8. We provide a hole for the Electrician to mount a GFCI.
9. Lid gasket is protected from the elements.
10. Built in skirt to protect the leading edge of the roof.
11. All mounting and lid hardware is designed so it dose not penetrate the Housing for additional protection.
12. Compress the leading edge of the roof between the housing and the top of the curb with a gasketed bolted connection.
Bulldog Dimensions
Bulldog Model AL 1010-2-4
Dimensions for AL1010-2-4
Housing Length 20 1/2 inches
Housing Width 14 1/2 inches
Housing Height (without Curb) 13 1/2 inches
There are three parts to the Height. The lid is 2 inches. The center 8 1/2 inches and the skirt at 3 inches.
Bulldog Curb Dimensions
Curb Length 19 1/4
Curb Width 13 1/4
Curb Height (without Housing) 11 1/2
The Curb has a two inch flange out to screw to the roof deck. Screw holes are on 2 inch centers.
Standard Models Avalable.
AL 1010-2-4 Aluminum Housing and Curb. stock item.
SS 1010-2-4 Stanless Housing and Curb Non stock item.
Housing Length 20 1/2 inches
Housing Width 14 1/2 inches
Housing Height (without Curb) 13 1/2 inches
There are three parts to the Height. The lid is 2 inches. The center 8 1/2 inches and the skirt at 3 inches.
Bulldog Curb Dimensions
Curb Length 19 1/4
Curb Width 13 1/4
Curb Height (without Housing) 11 1/2
The Curb has a two inch flange out to screw to the roof deck. Screw holes are on 2 inch centers.
Standard Models Avalable.
AL 1010-2-4 Aluminum Housing and Curb. stock item.
SS 1010-2-4 Stanless Housing and Curb Non stock item.
The Bulldog Housing is designed to accommodate two 1 1/2 to 3 3/4 inch pipes. Used mostly for low temp refrigeration lines, Steam, Solar and Dry Coolers. Because the insulation must be continuous. The seal is to the aluminum jacketing. Then an additional layer of insulation is added over the seal and jacketed to protect it from UV. .
Bulldog Curb Dimensions
Curb Length 19 1/4
Curb Width 13 1/4
Curb Height (without Housing) 11 1/2
The Curb has a two inch flange out to screw to the roof deck. Screw holes are on 2 inch centers.
Curb Length 19 1/4
Curb Width 13 1/4
Curb Height (without Housing) 11 1/2
The Curb has a two inch flange out to screw to the roof deck. Screw holes are on 2 inch centers.
